Units: the building block
Every part of Morse code is a whole number of units.
| Part | Length |
|---|---|
| Dot | 1 unit |
| Dash | 3 units |
| Gap between marks inside a letter | 1 unit |
| Gap between letters | 3 units |
| Gap between words | 7 units |
These ratios are set by the ITU standard for International Morse code. Change the length of one unit and the whole message speeds up or slows down.
Words per minute and the PARIS word
Words differ in length, so speed is measured against a standard word: PARIS. Sent with its
gaps, including the 7-unit gap after it, PARIS is exactly 50 units long:
.--. .- .-. .. ....
At 1 WPM you send PARIS once a minute, so 50 units take 60 seconds. That gives a simple formula:
unit length (milliseconds) = 1200 / WPM
| Speed | Unit (Dot) | Dash |
|---|---|---|
| 5 WPM | 240 ms | 720 ms |
| 13 WPM | 92 ms | 277 ms |
| 18 WPM | 67 ms | 200 ms |
| 20 WPM | 60 ms | 180 ms |
| 25 WPM | 48 ms | 144 ms |
Some programs use CODEX instead, a standard word of 60 units: -.-. --- -.. . -..-. At the same
WPM its units are shorter (1000 / WPM milliseconds). Most tools, including this site, use
PARIS.
Speed calculator
Enter a speed to see the unit and Dash length. Enter a character speed and a slower overall speed to get the Farnsworth gaps.
- Unit (Dot)
- 67 ms
- Dash
- 200 ms
- Gap between characters
- 0.62 s
- Gap between words
- 1.45 s
With an overall speed below the character speed, the gaps follow the ARRL Farnsworth formula.
Farnsworth timing
With Farnsworth timing, each character is sent at a faster speed (the character speed), but the gaps between characters and words are stretched so that the overall speed (the effective speed) is slower. It is named after Donald R. "Russ" Farnsworth, W6TTB, who promoted it for learning.
Why it helps: at slow standard speeds, letters are drawn out and sound like strings of marks to count. Farnsworth keeps every letter at its true rhythm and gives you time between letters to recognize it.
The ARRL's standard for Farnsworth timing works it out like this, with c the character speed and s the effective speed, both in WPM:
- total extra delay per PARIS word, in seconds: t = (60c − 37.2s) / (s × c)
- gap between characters: 3t / 19
- gap between words: 7t / 19
| Character / effective speed | Gap between characters | Gap between words |
|---|---|---|
| 18 / 5 WPM | 1.57 s | 3.66 s |
| 18 / 10 WPM | 0.62 s | 1.45 s |
| 20 / 13 WPM | 0.44 s | 1.02 s |
For comparison, at a standard 18 WPM the gap between characters is 0.2 s.
Play the same word twice: once at a standard speed, once with Farnsworth spacing. The letters sound the same; only the gaps change.
Hear the difference
First: 18 WPM, standard gaps. Second: the same 18 WPM letters, spaced out to 8 WPM.
Koch vs Farnsworth
They answer different questions, so they work well together.
- Koch decides what you practice: start with two characters, add one at a time when you copy about 90 percent correctly.
- Farnsworth decides how it is timed: fast characters, wider gaps.
A common setup is Koch's order of characters at a character speed of 15 to 20 WPM, with Farnsworth gaps that you shrink as you improve. How to learn Morse code
Typical speeds
Speeds people talk about, for reference:
- 5 WPM was the US amateur radio entry-level Morse test until the requirement was dropped in 2007.
- 13 WPM and 20 WPM were the US General and Extra class tests before 2000.
- Everyday conversations on the air (called rag-chewing) often run around 15 to 25 WPM.
Everyone's pace is different, and there is no deadline.
Morse Keyboard: a keyboard laid out as the Morse code tree, with a course of a weekend and four weeks. Day 1 is free. For iPhone and iPad.
Speed in Morse Keyboard
In Morse Keyboard, Typing sprint shows your typing speed in words per minute, and the course's Week 4 adds timed rounds. With Pro, Sound and Haptics lets you set the speed (WPM) and pitch of the tones you hear. Practice features
Morse Keyboard: a keyboard laid out as the Morse code tree, with a course of a weekend and four weeks. Day 1 is free. For iPhone and iPad.