Letter by letter
| Letter | Morse | Marks |
|---|---|---|
| S | ... | Dot Dot Dot |
| T | - | Dash |
| R | .-. | Dot Dash Dot |
| E | . | Dot |
| N | -. | Dash Dot |
| G | --. | Dash Dash Dot |
| T | - | Dash |
| H | .... | Dot Dot Dot Dot |
The shape of the word
It starts with S, three Dots, and ends with H, four Dots. Between those light ends, the word is weighted with Dashes: T, the Dash in R, the Dash in N, the two Dashes of G, and T again.
The middle, N then G, is the heaviest stretch: Dash Dot, then Dash Dash Dot. When you hear it, it sounds like the word leans forward and then lets go at the end. Altogether there are 12 Dots and 6 Dashes, with seven letter gaps holding them apart.
Length and timing
“Strength” is 1 word, 8 letters and 18 marks: 12 Dots and 6 Dashes. With standard timing it is 61 units long, from the first mark to the last: a Dot is 1 unit, a Dash 3, the gap inside a letter 1, between letters 3 and between words 7.
| Speed | One unit | The whole phrase |
|---|---|---|
| 5 WPM | 240 ms | 14.6 seconds |
| 13 WPM | 92.3 ms | 5.6 seconds |
| 20 WPM | 60 ms | 3.7 seconds |
Speed is counted in words per minute (WPM), using the word PARIS. Morse code speed and Farnsworth timing
Strength on the air
Radio operators talk about strength all the time, but they mean signal strength, and they have short codes for it.
- RST (
.-. ... -) is the signal report most hams send in a contact. The S stands for strength, rated 1 to 9. A report of 599 means readable, very strong and a clean tone. - QSA (
--.- ... .-) is the ITU Q code for signal strength (ITU-R M.1172). QSA? asks “how strong are my signals?”, and the answer is a number from 1 to 5.
Neither of these is a way to say the word, but they show how the idea lives on in the code. See more Q codes on the abbreviations page.
Shorter and related words
- Strong:
... - .-. --- -. --.. Six letters and 15 marks, with more Dashes than Dots. Shorter to wear, heavier to look at. - Stay strong:
... - .- -.-- / ... - .-. --- -. --.. Twenty-five marks over two words, better split across two pieces. - Paired words. STRENGTH sits well next to HOPE (12 marks) or BRAVE (14 marks) as a stack of two.
Ways to send it
- A squeeze before a big day. Tap it into someone's hand. Make each T a firm, clear press.
- A flashlight message. At a gentle pace, the whole word takes about 15 seconds. Practice once so the Ts stay separate.
- On a note in a lunch box or a hospital bag. Write the pattern with clear spaces between letters.
Making it fit on a bracelet
Here is the full count for a bead bracelet:
- 12 small beads for the Dots
- 6 long beads for the Dashes
- 7 spacers for the letter gaps
That is 25 pieces, longer than most single-word bracelets. On a small wrist, use smaller beads or let the word wrap close to the clasp. Do not drop the spacers to save room: without them the letters run together.
For a tattoo, a line of 18 marks and 7 gaps needs more length than a four-letter word. Ask your artist what spacing they suggest, and consider STRONG if the space is tight.
Send “Strength” as sound, light or vibration with Transmit in Morse Keyboard.
Easy slips with STRENGTH
- A T swallowed by its neighbor. The first T sits after S, and S plus a Dash looks like V
(
...-). The second T follows G, and if the gap closes, G and T become Q (--.-). - N and G merged. Dash Dot and Dash Dash Dot with no gap make
-.--., which is the ITU sign for an opening bracket “(”, not two letters. - H with three Dots. Three Dots is S. The word ends on four.
- Forgetting the E. One Dot between R and N is easy to miss in a long design.