Letter by letter
| Letter | Morse | Marks |
|---|---|---|
| Y | -.-- | Dash Dot Dash Dash |
| E | . | Dot |
| S | ... | Dot Dot Dot |
One heavy letter, then a run of Dots
YES has a clear front and back. Y is the only letter with Dashes: Dash Dot Dash Dash, a lopsided pattern that ends on two long sounds. Then E and S are pure Dots, one and then three.
So the word sounds like a firm start and a soft finish. The thing to listen for is the gap between E and S. Close it up and the four Dots in a row read as H, and YES turns into YH.
Length and timing
“Yes” is 1 word, 3 letters and 8 marks: 5 Dots and 3 Dashes. With standard timing it is 25 units long, from the first mark to the last: a Dot is 1 unit, a Dash 3, the gap inside a letter 1, between letters 3 and between words 7.
| Speed | One unit | The whole phrase |
|---|---|---|
| 5 WPM | 240 ms | 6.0 seconds |
| 13 WPM | 92.3 ms | 2.3 seconds |
| 20 WPM | 60 ms | 1.5 seconds |
Speed is counted in words per minute (WPM), using the word PARIS. Morse code speed and Farnsworth timing
Where C for yes comes from
Recommendation ITU-R M.1172 lists the abbreviations and signals used in the maritime radio service. In it, C is defined as "yes", or as a sign that the group before it should be read in the affirmative. Radio operators keep the habit: a lone C in reply to a question means yes.
The same list gives no as the full word, NO, -. ---. One detail surprises people: in
M.1172 the single letter N means north, not no. Amateur operators do use N for no in casual
contacts, but the maritime list keeps the two apart. There is more on that on the
No page.
Close relatives of yes on the air:
- R (
.-.): "received". It confirms you got the message, not that you agree with it. - OK (
--- -.-): in M.1172, "we agree" or "it is correct". See OK in Morse code.
Ways to say yes in fewer marks
| Form | Pattern | Note |
|---|---|---|
| YES | -.-- . ... | The full word, 8 marks |
| C | -.-. | "Yes" in ITU-R M.1172, 4 marks |
| R | .-. | "Received", not agreement |
| E | . | Not a standard yes; only if you agree it in advance |
A two-signal code
Yes and no are the base of many simple signal systems. A few that work:
- Taps for a game. Agree that C means yes and N means no, or keep it simpler with one tap for yes and two for no. Write the agreement down so nobody has to guess.
- A light across a room or a yard. C is four flashes, long, short, long, short. It is easy to tell apart from N, which is only two.
- Blinks. Some people who cannot speak for a while use blinks to answer questions, often one blink for yes and two for no. Morse can extend that to letters if both people know it, but the simplest code that everyone in the room understands is the right one. Agree on it out loud and check it before relying on it.
- A card in a drawer. Write YES and NO in Morse on a small card, so anyone can look it up.
Send “Yes” as sound, light or vibration with Transmit in Morse Keyboard.
Easy ways to get it wrong
- Y flipped to Q. Y is
-.--and Q is--.-. Same marks, different order, and YES becomes QES. - C and Y. Both start Dash Dot Dash. C ends on a Dot (
-.-.), Y ends on a Dash (-.--). Mix them up and your one-letter yes becomes a Y. - E and S run together. Four Dots make H, so YES turns into YH.
- Taking R as yes. R means the message arrived. The answer to the question may still be no.