Letter by letter
| Character | Morse | Marks |
|---|---|---|
| 7 | --... | Dash Dash Dot Dot Dot |
| 3 | ...-- | Dot Dot Dot Dash Dash |
A mirror image
In International Morse, every digit is five marks, and the two digits of 73 are reflections of each other. 7 is two Dashes then three Dots. 3 is three Dots then two Dashes. Heard together, the pattern rises from heavy to light and back to heavy, with the six Dots bunched in the middle.
That symmetry makes 73 one of the first numbers people recognize by ear. The numbers guide shows the rule behind it: 1 to 5 start with Dots, 6 to 0 start with Dashes.
Length and timing
“73” is 1 word, 2 characters and 10 marks: 6 Dots and 4 Dashes. With standard timing it is 29 units long, from the first mark to the last: a Dot is 1 unit, a Dash 3, the gap inside a letter 1, between letters 3 and between words 7.
| Speed | One unit | The whole phrase |
|---|---|---|
| 5 WPM | 240 ms | 7.0 seconds |
| 13 WPM | 92.3 ms | 2.7 seconds |
| 20 WPM | 60 ms | 1.7 seconds |
Speed is counted in words per minute (WPM), using the word PARIS. Morse code speed and Farnsworth timing
From telegraph code to sign-off
Long before radio, telegraph operators had number codes for common messages. Ham radio histories trace 73 to The National Telegraphic Review and Operator's Guide, first published in 1857. In 1859, Western Union adopted the 92 Code, a list of numbers from 1 to 92, and 73 was on it. The meaning was not fixed at first. The 92 Code list gives it as "I wish you well" in American use and "best regards" in British use. Over the years, "best regards" won out.
Amateur radio operators still use it every day, in Morse and on voice. It is so much a part of the culture that the footer of this site signs off with 73.
73s, 73 DE and other forms
- 73: "best regards". It is already plural in meaning, so "73s" says "best regardses". Operators will understand it, but it is a common beginner habit to drop.
- Best 73 or many 73: these repeat what 73 already says. You will hear them; you do not need them.
- 73 DE followed by your call sign: a common way to sign off at the end of a contact.
- 88
---.. ---..: "love and kisses", a much more personal sign-off. See the 88 page.
Ways to send it
- At the end of a contact. After the last exchange, send 73 and your call sign. The other station usually sends 73 back.
- In writing. Many operators sign emails, letters and forum posts with "73" and their call sign.
- As a tap. Ten marks, easy to tap as a goodbye to someone who knows the code.
Send “73” as sound, light or vibration with Transmit in Morse Keyboard.
The slip that turns 73 into 83
- 7 sent as 8. 7 has two Dashes; 8 has three (
---..). One extra Dash changes the number. - 3 sent as 2. 3 has three Dots; 2 has two (
..---). Count the Dots in the middle. - Cut numbers. Some operators shorten digits informally on the air, for example in contest exchanges. They are not part of the ITU standard; this page uses the full digits.
- 73s. See above. One 73 is enough.
Questions about 73
Is it 73 or 73s?
Just 73. The number already means "best regards", so adding an s doubles it. "73s" is a common slip, not a different meaning.
What is the difference between 73 and 88?
73 is a friendly "best regards" you can send to anyone. 88 means "love and kisses" and is kept for someone close. Both come from the same family of telegraph number codes.