Morse Keyboard

Coming soon to the App Store

Morse code phrase

CQ in Morse code

Updated November 21, 2026 · By the Morse Keyboard team at Yarsa Labs

The answer

CQ in Morse code is -.-. --.-. It is the call a radio operator sends to anyone listening: "I am on this frequency, and any station may answer." It is two letters, but for many new operators it is the first sound they learn to pick out of the noise.

Safety. In an emergency, call your local emergency number (for example 112 or 911). A phone light or speaker sending Morse is not a substitute for calling for help.

One word, two letters.

Letter by letter

LetterMorseMarks
C-.-.Dash Dot Dash Dot
Q--.-Dash Dash Dot Dash

Two letters with a swing

Both letters start with a Dash and both have four marks, so CQ has a steady, even swing. C goes Dash Dot Dash Dot, back and forth. Q goes Dash Dash Dot Dash, holding the long mark before the short one. Sent three times in a row, the two shapes form a rhythm that stands out on a busy band even before you consciously read the letters.

Q is the letter to watch. It has the same marks as Y, Dash Dot Dash Dash, in a different order, and at speed the two are easy to swap.

Length and timing

“CQ” is 1 word, 2 letters and 8 marks: 3 Dots and 5 Dashes. With standard timing it is 27 units long, from the first mark to the last: a Dot is 1 unit, a Dash 3, the gap inside a letter 1, between letters 3 and between words 7.

SpeedOne unitThe whole phrase
5 WPM240 ms6.5 seconds
13 WPM92.3 ms2.5 seconds
20 WPM60 ms1.6 seconds

Speed is counted in words per minute (WPM), using the word PARIS. Morse code speed and Farnsworth timing

From the telegraph office to the air

CQ is older than radio. British landline telegraph operators used it as a call to all stations, and an 1871 book of telegraph rules, Electrical Tables and Formulæ by Latimer Clark and Robert Sabine, already lists it. The Marconi Company brought it to wireless in 1904, and the 1912 International Radiotelegraph Convention in London adopted it as the general call for every country.

You will often hear that CQ stands for "seek you". It sounds right, and it is a handy way to remember it, but the letters were a telegraph code first, and the phrase was attached to them later.

CQ also gave its name to an early distress call. In 1904, Marconi added D, for distress, to make CQD. Between 1906 and 1908 it was replaced by SOS. When the Titanic sank in 1912, its operators sent CQD and SOS. The SOS guide tells that story.

CQ DX, CQD and other forms

  • CQ DX -.-. --.- / -.. -..-: a call for distant stations, usually on another continent. Other qualifiers work the same way, such as a country prefix after CQ.
  • CQD -.-. --.- -..: the old Marconi distress call. It is history now; the distress signal is SOS.
  • DE -.. .: "from", placed between the call and your own call sign.
  • K -.-: "go ahead". It ends the call and invites a reply.

How a CQ call is built

A typical call on CW (Morse on the air) has a fixed shape: CQ three times, DE, your call sign twice, then K. Using N0CALL, a made-up call sign used as an example and not a real station, that looks like this:

CQ CQ CQ DE N0CALL N0CALL K

Repeating CQ gives a listener time to tune in and recognize the call. Repeating the call sign gives them two chances to copy it correctly. Then you stop and listen. If no one answers, you call again after a pause.

Licensed operators send this on the air. Anyone can practice hearing it: play CQ on this page a few times until the rhythm is familiar, then try picking it out of real recordings. The abbreviations guide has the other short forms you will hear.

Send “CQ” as sound, light or vibration with Transmit in Morse Keyboard.

Coming soon to the App Store

Mistakes new operators make

  • Calling without listening. Check that the frequency is clear before you call, and leave time between calls for someone to reply.
  • Calling too long. A short call repeated a few times works better than one very long call.
  • Q and Y swapped. Same marks, different order. Q holds two Dashes first.
  • Using CQ to reach one person. CQ is for anyone. To call a particular station, send its call sign, DE, and yours.

Questions about CQ

What does CQ stand for?

Nothing, strictly. It was a telegraph code for a general call to all stations. "Seek you" is a later, popular reading that happens to fit its meaning.

How do you answer a CQ?

Send the caller's call sign, then DE, then your own call sign, usually twice, and end with K. The caller usually replies with your call sign and a signal report. If several stations answer at once, the caller picks one and the others wait.

Learn the letters, then tap it by heart.

A keyboard laid out as the Morse code tree, with a course of a weekend and four weeks. Day 1 is free.

Coming soon to the App StoreSee how it works